DIY Home Office Shelves to Help you get Organized!

This is a wall storage unit (with FREE step by step DIY instructions) that can help add more storage space in your home. It’s great for storing books, displaying decor or hanging pictures.

Download PDF Instructions for FREE

No Wall Damage

The shelf brackets and pegboard get screwed to the 2×4 timber stud using timber screws. There is no need to drill or screw anything  into the wall which saves having to spackle and paint. A great time saver if you are a renter like me.

Easy to Use Brackets

The timber posts are easy to set up using Labrico 2×4 Adjuster brackets. There is a top and bottom bracket which pop on each end of the 2×4. The top bracket is tightened against the ceiling by turning the adjusting screw. 

It’s held there by tension and no tools are required.

Create Your Own Space

You can customize your wall storage unit to suit your space. You can: 

  • add a couple more shelves
  • have shelves that span across the 3 beams (rather than the zig-zag design)
  • hooks for pictures

If you have a narrow space you can use 2 timber posts instead of 3 and have a single column of shelves. (see picture below)

MORE Wall Storage Ideas

There are many different ways to build storage or display items in your home. 

Shop for Hardware Brackets

Project Information

Tools

  • Drill
  • Drill bits 
  • Measuring tape
  • Screwdriver 
  • Spirit level (or download the “Bubble Level” App for iphone for free)

Supplies

  • Labrico 2×4 Adjuster brackets x 3
  • 2×4 Wood post vertical x 3
  • 7” x 9” shelf brackets x 8
  • 40 cm x 24 cm pine board shelf x 4
  • 86cm x 60 cm pegboard x 1
  • Pack of 1 ¼” wood screws for pegboard
  • Pack of ¾” Wood screws for shelf bracket

Step By Step Instructions

Download Step by Step Instructions - FREE

1

Labrico flat ceiling ok, not sloped ceiling

Select location.

The Labrico 2×4 Adjuster brackets need a flat and sturdy ceiling and floor.

Check the ceiling and floor.

2

Measure the length of the floor to ceiling.

Minus 3.7 inches or 95 mm from the measurement.

3

Put the upper bracket and bottom bracket on the wood post.

Pop on the upper and bottom bracket onto the wood post.

4

Step 4: Lift the wood post into place
Lift the wood post into place.

5

Turn the adjusting screw clockwise to tighten the upper cap against the ceiling.

6

Step 5: Check the wood post is vertical by using a spirit level

Use a spirit level to check the wood post is vertical.

If not, loosen the adjusting screw and reposition.

TIP: For an online spirit level, download “Bubble Level” for free from the iphone app store.

7

Setup the 3 posts 30cm (11.8”) apart

8

Install the 9” x 7” shelf brackets

The 9” length attaches on the shelf

The 7” length attaches to the timber post

9

Fasten the first shelf to the post.

I have put on some dimensions which you can use as a guide. 

Otherwise, you can choose your shelf height to suit your needs.

10

Install the other shelves.

11

Install the pegboard. 

I sat my pegboard at the same height as the top shelf – 120cm (47.2”). 

Choose a height that suits.

More Storage Ideas

DIY Shoe Rack with 8 Shelves!

Adjust your shelf height to suit your shoes

Organise your shoes by building this sturdy shoe rack in your entryway. Designed with height adjustable shelving, your tall boots, your runners and your flats all can live in the a place. 

Got a LOT of shoes? No problem. Make your shelves longer to accommodate. 

Read More

FREE Step by Step Building Instructions

Standing Desk for Laptop

This basic standing desk has a very small footprint and can be set up anywhere in the home – including the kitchen.

Standing desks range from $150 to $350 but DIY and this desk will cost around $60-$70. A small price to pay for such a handy desk! 

Read More

FREE Step by Step Building Instructions

How to Hang Plants in the Kitchen

Hang plants on the kitchen counter

Find some spare wall space in your living space or kitchen to hang your plants.  Perhaps a spot next to a window perhaps. That’s not a problem using the Labrico 2×4 brackets.  

Using the brackets, you can setup a post against a well or freestanding.

Read More

FREE Step by Step Building Instructions

Safety

TheStorageWall.com and its authors hold no responsibilities for injuries or damages caused by any attempts to recreate the projects, or follow the tutorials listed on this site. The information, tutorials, images and instructions provided on TheStorageWall.com are intended as inspiration only. Any attempt to recreate the projects posted on this site is at the risk of the individual, and the authors of TheStorageWall.com cannot be held liable. While the authors of TheStorage wall.com work tirelessly to provide accurate and trustworthy content at all times, they, nor the brand, can be held responsible for any injury, monetary loss, or any other issue that occurs as a result of use of the information offered on TheStorageWall.com.

Subscribe
Notify of
guest
1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Erjilo Pterin
Erjilo Pterin
8 months ago

I like the helpful info you supply for your articles. I will bookmark your blog and take a look at again right here frequently. I am moderately certain I’ll be told many new stuff right right here! Best of luck for the following!

Scroll to Top