Until now, DIY parts were mostly for professional use and required complicated procedures and tools. LABRICO have created DIY hardware to make DIY easier.
The 2×4 Adjuster can be mounted vertically to create vertical DIY storage in your home. If used as a single post you can hang decor, mount Dyson vacuum, hang pictures.
No tools needed!
Freestanding or Lean Against the Wall
The Labrico 2×4 Adjuster bracket gives you the flexibility to setup a vertical post anywhere in the room. It can be in the middle of the room, in the corner or against the wall.
No Wall Damage
Build storage and shelving space without needing to drill, screw or nails into the wall. No need to find the stud or to patch & paint.
Heavy Duty Brackets
With a 20kg load bearing weight, you can hang and fasten heavier items safely.
Even when fixed vertically, the ceiling and floor are not scratched because of the non-slip padding. It can be used safely in your home.
What are People Saying?
2x4 Bracket Installation Instructions
Check the strength of the ceiling at the installation location and measure the height of the ceiling. Prepare 2×4 timber post (*) that is 95mm shorter than the height of the ceiling.
* Commercially available 2 × 4 material (38 × 89mm)
Place the top cap and bottom cap onto the 2×4.
Stand the timber post vertically and tentatively determine the location.
Turn adjusting screw clockwise until secure against the ceiling.
Note: Don’t over tighten
Note: From time to time, check the tension in the top bracket
Complete! Various uses are possible, such as arranging as pillars or combining other parts to make a shelf.