DIY Shelf and Storage Hardware
Until now, DIY parts were mostly for professional use and required complicated procedures and tools. LABRICO have created DIY hardware to make DIY easier.
Can be used in combination with other post supports like the Labrico 2x4 post support.
The shelf support is used to set up horizontal shelving. While in combination with 2×4 post bracket, you can build a wall shelf system useful for storage, wall decor, organising kids jackets and bags. The possibilities are endless.
Easily removed when no longer needed. Reusable! Great for renters
The shelf support is fastened directly on the supporting timber so it can be removed when not in use. Of course it does not scratch or puncture the walls.
No need to mark pilot holes and screw positions
After determining the appropriate height of the shelf, fasten using the screws provided. There is no need to mark out a screw position or to drill a pilot holes.
It is a neat design with no screws visible from the front.
On the back of the shelf, fasten this product and 2×4 timber post in two places with the attached screws. Repeat for the other end.
Insert 2×4 timber post to to shelf support product.
After sliding the 2×4 timber through the shelf bracket, choose the desired height of the shelf. You can do this by sliding the shelf brackets along the timber beam. Attach the shelf bracket to the desired height using the screws provided.
Install the other side in the same way.